Tuscan Foundry Products Logo Black
Find out more about our products by giving us a call
0333 987 4452
Linkedin Envelope
Tuscan Foundry Products Logo Black

Established 1893   |   BS 460:2002 Certified   |   UK & International Supply   |   Expert Technical Support   |   0333 987 4452

G46 Moulded Gutter 135 Degree Angle, G46EOANG
CODE G46EOANG Category

G46 Moulded Gutter 135 Degree Angle

Price range: £82.50 through £145.40 ex VAT (£99.00 – £174.48 inc VAT)

A genuine cast iron rainwater pattern the G46 or No.46 is available in two profile sizes. The profile is a larger version of the more traditional ogee (OG) curved pattern and offers increased capacity.

UK delivery from £30. Fittings are despatched boxed. See delivery rates.

The cast iron G46 moulded gutter 135 degree angle provides an obtuse corner fitting for the G46 pattern, handling bay windows, canted elevations, and returns on the large Victorian and Edwardian properties where the G46 is the standard profile. The full G46 moulded cross-section is maintained through the angle, ensuring the profile reads consistently at every junction.

Manufactured in solid cast iron to BS 460:2002. Available in both profile sizes: 125mm (5″) and 150mm (6″). Supplied in primed or factory black finish. The G46 135 degree angle is not interchangeable with common ogee fittings — all fittings must be from the G46 range.

Commonly specified on country houses, rectories, civic buildings, and large institutional properties where the prominent bay-fronted or multi-faceted elevation requires the obtuse angle fitting to complete the gutter run correctly. Accepted by conservation officers as the appropriate fitting for period rainwater work.

Compatibility: G46 moulded cast iron gutter 125mm and 150mm only. For specification support, call 0333 987 4452.

Additional information

Size/Finish

Primer 100mm x 75mm, Primer 125mm x 100mm, Black 100mm x 75mm, Black 125mm x 100mm
Socket

Internal, External

Cross-reference

Primer 100mm x 75mmG4312 (ext) / G4313 (int)
Primer 125mm x 100mmG5412 (ext) / G5413 (int)
Black 100mm x 75mmXG4312 (ext) / XG4313 (int)
Black 125mm x 100mmXG5412 (ext) / XG5413 (int)

FAQ Categories

All FAQ
What is G46 moulded cast iron guttering?
The G46 — also known as the No.46 moulded pattern — is a larger and more decorative version of the common ogee cast iron gutter. It shares the S-curve cross-section of the ogee but with a deeper profile, more pronounced moulded detail, and greater drainage capacity. It is found on Victorian and Edwardian country houses, manor houses, civic buildings, hotels, large churches, and institutional properties where the roof area required higher capacity rainwater drainage. All G46 fittings, brackets, and clips are specific to this pattern and are not interchangeable with common ogee products.
What sizes does G46 moulded cast iron guttering come in?
G46 moulded cast iron guttering is available in two sizes: 125mm (5 inch) and 150mm (6 inch). These are larger than the three common ogee sizes, reflecting the greater drainage capacity of the G46 profile. Tuscan Foundry Products supplies the full range of G46 sections, angles, outlets, stop ends, clips, and brackets.
Can I mix G46 fittings with common ogee fittings?
No. G46 moulded fittings are sized and profiled specifically for the G46 section. They are not interchangeable with fittings from the common ogee (OG) range. Always specify all fittings, angles, brackets, and clips from the G46 range when working with G46 guttering.

Related products