Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £9.90 through £16.20 ex VAT (£11.88 – £19.44 inc VAT)
Our cast iron Og gutter stopend and cast iron ogee gutter stop ends
are suited to most period property renovations. Cast iron ogee gutter
is available in primed and black as standard.
Sizes Available:
100mm (4″)
115mm (4.5″)
125mm (5″)
Cast iron Og gutter stop end external (for spigot): OG4030, OG4530, OG5030, XOG4030, XOG4530, XOG5030
Cast iron Og gutter stop end internal (for socket): OG4031, OG4531, OG5031, XOG4031, XOG4531, XOG5031
A genuine cast iron rainwater system with the traditional ogee (OG) curved pattern.
UK delivery from £45. Longer items are despatched palletised. See delivery rates.
The cast iron OG gutter stop end internal left-hand closes the open left-hand end of a cast iron ogee gutter run where an internal (inside-face) closing is required. Stop ends are among the smallest but most important fittings in a gutter system — a missing or failed stop end will allow water to escape at the terminal point of the run, causing damage to the fascia, soffit, and wall below.
Manufactured in solid cast iron to BS 460:2002. Available in the three standard ogee sizes: 100mm (4″), 115mm (4.5″), and 125mm (5″). Supplied in primed or factory black finish. The left-hand internal stop end is the mirror opposite of the external right-hand stop end — check the configuration of your run before ordering.
Specified on listed buildings and heritage restoration projects across England and Wales where the cast iron ogee is the historically correct profile. Accepted by conservation officers as the appropriate fitting for period rainwater work.
Compatibility: Cast iron ogee gutter 100mm, 115mm, 125mm. For specification support, call 0333 987 4452.
| Size/Finish | Primer 100mm, Primer 115mm, Primer 125mm, Black 100mm, Black 115mm, Black 125mm |
|---|
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Please call 0333 987 4452 or use the contact form with the size, quantity and connection details, and we'll provide a quotation.
Our bespoke rise and fall gutter brackets — including fascia, side rafter, and top rafter variants for Osma Roofline and Osma SuperLine systems — are manufactured to order. The standard lead time is 10–14 working days from receipt of a confirmed order. If you have a programme deadline, please call us on 0333 987 4452 and we will advise on current availability.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The Paxton H82 accepts round, square, and rectangular pipe connections. Round: 65mm, 75mm, and 100mm. Square: 75×75mm, 100×100mm, and 125×125mm. Rectangular: 100×75mm, 125×100mm, and 150×100mm. Bespoke adaptations including double pipe connections are also available on request. Please confirm your required connection type when ordering.
The standards for our cast iron gutters and pipes have remained remarkably constant for many years. The physical properties of cast iron are sustained throughout its lifetime thus maintaining its effectiveness. Coupled with is durability and proper maintenance, we would expect our traditional cast iron rainwater products to last for over 50 years under normal conditions.
Yes. Cast iron airbricks are the appropriate material for listed buildings and conservation area properties where the original ventilation grilles were cast iron. They maintain the character and material authenticity required by most conservation officers and listed building consent conditions. We recommend confirming the specific pattern with your conservation officer before ordering.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The satin chrome telescopic rooflight hand winder is well suited to contemporary and transitional interiors where a brushed chrome finish complements modern or minimal ironmongery. It is compatible with Lumen Rooflights and timber-framed skylights.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
