Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £26.95 through £29.15 +VAT
Top rafter rise and fall bracket for G46 cast iron gutter.
Sizes available:
100mm x 75mm
125mm x 75mm
We also manufacture top rafter rise and fall brackets for Og and moulded gutters made by: Osma, Marley, Hunter and Lindab
The RB500G46 is a top rafter rise and fall bracket for the G46 moulded cast iron gutter. Where open eaves construction or the absence of a fascia board requires fixing to the top surface of a rafter, the RB500G46 provides a secure, adjustable support that allows precise fall setting across the gutter run. The bracket cup is dimensioned specifically for the G46 moulded section — the larger Victorian and Edwardian ogee profile — ensuring a correctly seated fit.
Available in both G46 profile sizes: 125mm (5″) and 150mm (6″). Zinc-plated steel finish for outdoor corrosion resistance. The threaded rise and fall cup eliminates shimming and allows accurate gradient control on long runs or complex roof lines, which is particularly important on the large Victorian and Edwardian buildings where the G46 profile is commonly found.
Specified on listed buildings and heritage restoration projects where the G46 moulded pattern is the historically correct profile. The RB500G46 is the G46 equivalent of the RB500 bracket range, dimensioned for the wider and deeper G46 section.
Compatibility: G46 moulded cast iron gutter 125mm and 150mm only. For specification support, call 0333 987 4452.
| Size | -J- 100mm x 75mm, -M- 125mm x 100mm |
|---|
Tuscan Foundry's cast iron hopper heads are available in Standard Black and Heritage Colour finishes. A linseed oil paint finish is also offered — a sustainable, vapour-permeable option particularly appropriate for listed buildings and conservation projects. Heritage colour swatches are available from the team on request.
The handle is compatible with Lumen Rooflights and most pole-operated rooflight and skylight systems. If you are unsure whether it suits your specific rooflight, call us on 0333 987 4452 and we can advise.
Yes. Cast iron hopper heads are the historically appropriate choice for listed buildings, and are generally preferred by conservation officers and local planning authorities over modern plastic alternatives. Tuscan Foundry cast iron hopper heads are manufactured in solid grey iron and are suitable for use on listed buildings and within conservation areas. A linseed oil finish is also available, which is particularly appropriate for sensitive heritage projects.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
The opener is designed for use with Lumen Rooflights and compatible timber-framed skylights. The telescopic shaft and adjustable mounting bracket allow it to be fitted to a range of rooflight frames. If you have a specific rooflight model, call us on 0333 987 4452 to confirm compatibility.
Yes. All our mild steel brackets are supplied in either silver or black zinc plate. This coating protects the metal however, both will need painting prior to installation.
We have chosen to use zinc plating for two reasons; firstly that it is a more environmentally friendly than galvanising and secondly that it does not block up the threaded part of the rise and fall cups in the way that galvanising does.
The Ornamental Airbrick is most appropriate on Victorian Gothic buildings — churches, chapels, vicarages, almshouses, collegiate buildings, and high-specification estate architecture — where decorative ironwork was part of the original design. It suits listed building replacements in kind and heritage new build where period accuracy in detailing is expected.
The Regent H1 is well suited to Victorian and Edwardian terraces, listed commercial buildings, civic and institutional properties, and ecclesiastical buildings where a traditional funnel-form hopper is architecturally appropriate. Its multi-faceted tapering body reads as period-accurate on Gothic and classical building types alike, and it is a commonly specified choice for conservation and listed building projects across the UK.
The Cast Iron Louvre Airbrick suits Victorian, Edwardian, and inter-war residential and commercial properties where the louvre-pattern vent was the standard specification. It is the correct like-for-like replacement on listed buildings and conservation area properties, and suits new heritage-style construction requiring an authentic period ventilation grille.
The satin chrome telescopic rooflight hand winder opener is available in multiple sizes. The telescopic mechanism adjusts to accommodate varying rooflight positions and throw requirements. For a full list of available sizes, visit tuscanfoundry.com or call 0333 987 4452.
