How long is the drive in spike on your rise and fall gutter bracket?
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
Price range: £81.97 through £135.40 +VAT
Our plain deep half-round 90-degree cast iron gutter angle and deep gutter system is suited to most period property renovations. Cast iron deep half round gutter is available in primed and black as standard.
Sizes Available:
100 x 75mm
125 x 75mm
Plain deep half round 90 degree cast iron gutter angle (left hand): DH4310, DH5310, XDH4310, XDH5310
Plain deep half round 90 degree cast iron gutter angle (right hand): DH4311, DH5311, XDH4311, XDH5311
A genuine cast iron rainwater system with the traditional deep flow gutter.
Plain Deep Half Round 90 Degree Angle
A genuine cast iron rainwater pattern the deep half round is available in two profile sizes. The profile is a larger version of the more traditional half round pattern and offers increased capacity.
Cast iron gutters and pipes offer great strength and durability, a proven history of long life, low noise operation and fire resistance. Most old buildings have cast iron rainwater systems that should be maintained and preserved however; these inherent benefits make a cast iron rainwater system an ideal choice for both traditional and modern installations.
| Size/Finish | Primer 100mm x 75mm, Primer 125mm x 75mm, Black 100mm x 75mm, Black 125mm x 75mm |
|---|
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
Cast iron radiators cost no more to run than modern steel or aluminium radiators. Cast iron is a very efficient material at emitting heat, thus you have items like le creuset cast iron pans. Cast iron holds it’s heat extremly well, which means that the radiators stay warm for longer.
Yes. All our mild steel brackets are supplied in either silver or black zinc plate. This coating protects the metal however, both will need painting prior to installation.
We have chosen to use zinc plating for two reasons; firstly that it is a more environmentally friendly than galvanising and secondly that it does not block up the threaded part of the rise and fall cups in the way that galvanising does.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
Casting of iron is an imperfect processs. It is possible with some cast iron radiators that you will get minor imperfections in the surface finish. When radiators are painted this will reduce and over the years every additional coat of paint applied will provide a smoother more equal finish.
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
We manufacture a wide variety of brackets for many different cast iron gutter and pipe profiles. More common types are the rise and fall, top fix and side fix rafter and the holderbat or pipe clip.
We can also offer traditional drive brackets, repair brackets and fascia brackets in both steel and cast iron.
It is always advisable to replace like with like because quite often the brackets form and important part of the buildings architecture. Occasionally buildings have special decorative brackets and our UK manufacturing allows us to produce small quantities of bespoke brackets when required.
Our brackets are more commonly used on cast iron rainwater systems. Unlike plastic, cast iron is heavy and the weight keeps the gutter in position. As such our brackets do not normally have retaining clips which could lead to plastic or lightweight gutters blowing out of the bracket. The profile of your gutter should match that of our bracket but without the weight to keep it in place you may well encounter problems in bad weather.
BTU stand’s for British Thermal Units. This was the old (Imperial) measurement for heat in connection with plumbing. Although BTU’s is a term still commonly used within the heating and plumbing, the industry is now going over to KW’s Kilowatts.
It is possible for us to supply towel warmers with an electric heating element in them. The Electrad system is a unique system available to us, that enables independent heating of towel rails and radiators via the properties electrical system.
