Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £9.94 through £16.29 +VAT
Our cast iron Og gutter stopend and cast iron ogee gutter stop ends
are suited to most period property renovations. Cast iron ogee gutter
is available in primed and black as standard.
Sizes Available:
100mm (4″)
115mm (4.5″)
125mm (5″)
Cast iron Og gutter stop end external (for spigot): OG4030, OG4530, OG5030, XOG4030, XOG4530, XOG5030
Cast iron Og gutter stop end internal (for socket): OG4031, OG4531, OG5031, XOG4031, XOG4531, XOG5031
A genuine cast iron rainwater system with the traditional ogee (OG) curved pattern.
The cast iron OG gutter stop end internal left-hand closes the open left-hand end of a cast iron ogee gutter run where an internal (inside-face) closing is required. Stop ends are among the smallest but most important fittings in a gutter system — a missing or failed stop end will allow water to escape at the terminal point of the run, causing damage to the fascia, soffit, and wall below.
Manufactured in solid cast iron to BS 460:2002. Available in the three standard ogee sizes: 100mm (4″), 115mm (4.5″), and 125mm (5″). Supplied in primed or factory black finish. The left-hand internal stop end is the mirror opposite of the external right-hand stop end — check the configuration of your run before ordering.
Specified on listed buildings and heritage restoration projects across England and Wales where the cast iron ogee is the historically correct profile. Accepted by conservation officers as the appropriate fitting for period rainwater work.
Compatibility: Cast iron ogee gutter 100mm, 115mm, 125mm. For specification support, call 0333 987 4452.
| Size/Finish | Primer 100mm, Primer 115mm, Primer 125mm, Black 100mm, Black 115mm, Black 125mm |
|---|
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
Prices are shown on the product page. For project quantities, specification support, or a formal quotation, call 0333 987 4452 or use the contact form.
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
Yes. Both the satin and polished chrome telescopic rooflight hand winder openers are compatible with Lumen Rooflights and most timber-framed skylights. Call 0333 987 4452 if you need to confirm compatibility with a specific model.
Yes. Our telescopic screw-jack openers and pole-operated handles are compatible with Lumen Rooflight systems. They are also suitable for use with other timber-framed rooflights and skylights fitted with appropriate catches or stays. If you are unsure of compatibility, call us on 0333 987 4452 and we can advise.
Yes. The ornamental foliate pattern was widely used in Victorian construction and is appropriate for Grade II listed buildings and conservation area properties. Its decorative character is often preferable to a plain pattern on prominent or formal elevations. We recommend confirming the pattern with your conservation officer as part of any listed building consent application.
The Gothic foliate tracery design of the Ornamental Airbrick provides a good free-flow ventilation area relative to its face size. The open area is comparable to other standard cast iron airbrick patterns. The visual density of the pattern at a distance reads as solid ironwork, which suits formal and decorative elevations without compromising subfloor ventilation effectiveness.
Rooflight opener handles can be ordered directly through tuscanfoundry.com. For volume orders or project-specific queries, please call 0333 987 4452 or use the contact form on our website.
Yes. Cast iron rainwater goods are widely accepted by conservation officers and historic environment bodies as the appropriate material for listed buildings. Tuscan Foundry's hopper heads are manufactured in solid cast iron to BS 460 specification and are suitable for use on all listed building classes. A linseed oil paint finish is also available, which is particularly appropriate for conservation projects.
Prices are shown on each product page. For project quantities, specification advice, or a formal quotation, please call 0333 987 4452 or use the contact form.
