Poor gutter alignment or sagging is a significant cause of inadequately functioning rainwater systems; this, in turn, can result in the overflow of rainwater, the formation of damp spots, and possible structural damage to the building.
Therefore, it is essential to ensure that the brackets supporting and retaining the gutters are symmetrical and robust enough to keep the gutter, which is frequently quite weighty when made of cast iron!
Many less expensive off-the-shelf brackets are made in foreign countries with inferior materials that do not provide sufficient strength. They are inadequately finished, reducing their durability, and will not offer the same durability and safety as British-made brackets.
Due to the increased rainfall, we are beginning to experience due to climate change, we must plan to ensure that our gutters can withstand falling leaves, heavy rainfall, and high winds.
The brackets must be robust enough and have the correct profile for the guttering to be installed straight; otherwise, the guttering will twist and become ineffective at keeping water away from the building’s foundations.
In the past, every village or municipality had a blacksmith who made horseshoes (this is how our business began in 1893) and architectural fittings for the surrounding properties.
When replacement brackets are used, they must be sturdy enough to support the gutters; a rise-and-fall bracket manufactured in the United Kingdom with a more substantial cup and sturdier thread will provide a more robust solution.
It is essential to choose the correct bracket for the job, which is especially crucial for an effective rainwater system. Ensure the brackets you use are made of heavy-duty steel and have a zinc or galvanised finish.
Polypipe Half-Round Guttering
Polyflow Deep Capacity Guttering
Polypipe Square Guttering
Polypipe Ogee Extra Capacity Guttering
Polypipe Sovereign High Capacity Gutter
Polypipe Elegance Cast Iron Effect Polyflow
Where the building has an existing fascia, this will help with the irregularity of levels, but again, putting up a new fascia would not necessarily look in keeping with a period property.
We can supply fascia brackets that take the gutter where adjustment is required
Where the building has an existing fascia, this will help with the irregularity of levels, but again, putting up a new fascia would not necessarily look in keeping with a period property.
Fascia Rise and Fall Brackets
Where there is no fascia, Polypipe gutter brackets may be fixed directly onto the rafter via a top rafter or a side rafter bracket.
These are also available as a rise and fall bracket for when the rafter heights are not aligned due to building settlement, etc., produced from heavy gauge steel, they will provide sturdy support.
Polypipe Polyflow Side Rafter Rise and Fall Brackets
Where there is no fascia, Polypipe gutter brackets may be fixed directly onto the rafter via a top rafter bracket.
These are available as a rise and fall bracket for when the rafter heights are not aligned due to building settlement, etc., produced from heavy gauge steel, they will provide sturdy support
A gutter rise and fall bracket with a thick (M10) thread are also particularly useful where old buildings have suffered from the settlement, causing irregularity in the levels of the rafters, which can cause problems when fitting or repairing the gutter. The benefit of a rise and fall bracket is that it can be adjusted according to the rise and fall of the gutter.
Many regions have an architectural or regional style of bracket, which may be apparent in the architecture according to the climate, as in the North of Scotland where Rhone brackets (top rafter brackets) are used. The increased strength of top fixing (rhone) rafter brackets is beneficial for the increased weight of snow and wind loadings.
These are just some examples of the bespoke bracket profiles that Tuscan Foundry can manufacture here in the UK. In addition, we can manufacture brackets to match your existing brackets, enabling your building to maintain its unique character. Brackets for gutters with unique profiles are still made available and can be produced in bespoke designs.
For Further information on any of our standard or bespoke gutter brackets, please contact our sales office.
Sales & Customer Services:
0333 987 4452
Tyn-Y-Clyn
Llanafarn Fawr
Builth Wells
Powys LD2 3LU
United Kingdom
Tuscan Foundry Products, Tyn-Y-Clyn, Llanafan Fawr, Builth Wells, Powys LD2 3LU, United Kingdom
© Tuscan Foundry Products 2022
A deep dive into the history, common issues, and maintenance of cast iron rainwater goods, with a focus on traditional Scottish architecture; cast iron rainwater goods have been a staple of Scottish architecture for centuries, prized for their durability, strength, and aesthetic appeal. These qualities are particularly important in Scotland, where the weather can be harsh and unforgiving. They are a testament to the craftsmanship and ingenuity of a bygone era, adding a touch of elegance and historical significance to buildings across the country.
Cast iron’s journey in Scottish architecture began in the 18th century. Its resilience and ability to withstand the challenging Scottish climate quickly gained popularity. The relatively low production cost of cast iron made it a popular choice for residential and commercial buildings, contributing to its widespread adoption.
The 19th century marked the pinnacle of cast iron rainwater goods in Scotland. This era saw the construction of magnificent Victorian buildings adorned with elaborate cast-iron rainwater systems, showcasing decorative hoppers, rhones (the Scottish term for gutters), and leader heads (downpipes). These features served a practical purpose, channelling rainwater away from the building and enhancing the architectural beauty of the structures.