Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£84.64
Brass period rooflight handle opener for pole operated opening mechanisms.
Inc. Lumen Rooflights
The Brass Rooflight Opener Handle – 1520mm is a handmade pole-operated rooflight handle finished in polished brass, designed for use with timber-framed rooflights and skylights that require operation from floor level or from a distance. At 1520mm in length, it is suited to rooflights positioned above head height — common in stairwells, hallways, and double-height spaces in period and traditional buildings.
The handle is constructed with a turned hardwood grip and a polished brass shaft, terminating in a 15mm-diameter hook for engagement with a rooflight stay or fitting. The handmade construction gives each piece a considered, craft quality that suits heritage interiors. It is commonly specified alongside Lumen Rooflight systems but is compatible with any rooflight fitted with an appropriate catch or stay.
Frequently ordered alongside a coat hook, the handle doubles as a decorative wall feature when not in use — a practical consideration in entrance halls and period interiors. Suited to Georgian terraces, Victorian townhouses, country houses, listed buildings, and any project where the opening mechanism should remain visually consistent with the building’s character.
For advice on compatibility or to discuss your project, call 0333 987 4452 or use the contact form on our website.
The H1A is available with round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. Please specify your required connection size when ordering, as this determines the SKU. If you are unsure of the correct pipe size for your project, our team can advise — call 0333 987 4452.
Yes. Cast iron hopper heads are the historically appropriate choice for listed buildings, and are generally preferred by conservation officers and local planning authorities over modern plastic alternatives. Tuscan Foundry cast iron hopper heads are manufactured in solid grey iron and are suitable for use on listed buildings and within conservation areas. A linseed oil finish is also available, which is particularly appropriate for sensitive heritage projects.
The Antique Black cast iron version is suitable for external use. The Polished Lacquered version is best suited to interiors or sheltered external locations where the polished finish will be protected from weathering. The Polished Brass version is suited to interior and semi-exposed locations. For external applications on exposed elevations, the Antique Black finish is the recommended specification.
Yes. Both the satin and polished chrome telescopic rooflight hand winder openers are compatible with Lumen Rooflights and most timber-framed skylights. Call 0333 987 4452 if you need to confirm compatibility with a specific model.
Yes. Polished brass is a historically appropriate finish for period and listed buildings and is generally acceptable to conservation officers. If your project requires specific confirmation, we are happy to advise — call 0333 987 4452.
Available in two sizes: 225mm x 82mm (single airbrick course height) and 225mm x 150mm (double course height). Both sizes fit standard brick coursing positions and install flush into the wall face.
Cast iron radiators cost no more to run than modern steel or aluminium radiators. Cast iron is a very efficient material at emitting heat, thus you have items like le creuset cast iron pans. Cast iron holds it’s heat extremly well, which means that the radiators stay warm for longer.
The School Board Airbrick (F020801AFC) is available in three standard sizes: 225mm × 75mm, 225mm × 150mm, and 225mm × 225mm. These correspond to one-, two-, and three-brick-course heights and allow ventilation requirements to be met across a range of subfloor and wall opening sizes.
Yes. Cast iron airbricks are frequently specified for listed buildings and conservation area properties precisely because they replicate the material and pattern of the original Victorian and Edwardian ventilation grilles. Local conservation officers and building control typically accept like-for-like cast iron replacements without objection. We can provide product specifications and material datasheets to support applications.
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
