Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
£84.64
Brass period rooflight handle opener for pole operated opening mechanisms.
Inc. Lumen Rooflights
The Brass Rooflight Opener Handle – 1520mm is a handmade pole-operated rooflight handle finished in polished brass, designed for use with timber-framed rooflights and skylights that require operation from floor level or from a distance. At 1520mm in length, it is suited to rooflights positioned above head height — common in stairwells, hallways, and double-height spaces in period and traditional buildings.
The handle is constructed with a turned hardwood grip and a polished brass shaft, terminating in a 15mm-diameter hook for engagement with a rooflight stay or fitting. The handmade construction gives each piece a considered, craft quality that suits heritage interiors. It is commonly specified alongside Lumen Rooflight systems but is compatible with any rooflight fitted with an appropriate catch or stay.
Frequently ordered alongside a coat hook, the handle doubles as a decorative wall feature when not in use — a practical consideration in entrance halls and period interiors. Suited to Georgian terraces, Victorian townhouses, country houses, listed buildings, and any project where the opening mechanism should remain visually consistent with the building’s character.
For advice on compatibility or to discuss your project, call 0333 987 4452 or use the contact form on our website.
The Ornamental Airbrick (OAB) is available in three sizes: 225mm × 75mm (2.8kg), 225mm × 150mm (4.1kg), and 225mm × 225mm (5.8kg). All sizes have a uniform depth of 75mm, making them consistent to install across a subfloor ventilation course.
We are able to place dates and initials and insignia onto most of our flat faced rainwater hopper heads.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
The H1 is available to accept round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. The 65mm and 75mm variants measure 305mm wide by 197mm deep and 210mm high. The 100mm variant measures 355mm wide by 230mm deep and 240mm high. A 150mm connection option is also available — please contact the team for dimensions.
Our cast iron hopper heads are available in a standard primed and black-painted finish, ready for on-site topcoats. Heritage colour finishes and factory-applied linseed oil paint are available on request. Linseed oil paint is a vapour-permeable, period-appropriate finish particularly well suited to listed buildings and conservation area properties.
The H1A is available with round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. Please specify your required connection size when ordering, as this determines the SKU. If you are unsure of the correct pipe size for your project, our team can advise — call 0333 987 4452.
The Brass Rooflight Pole Winder Opener 300mm is a screw-jack operated rooflight opener designed for manual control of timber-framed skylights and Lumen Rooflights. The 300mm fixed arm is suited to standard rooflight positions and is finished in polished brass.
A hit and miss vent has a sliding plate on the reverse of the grille that can be moved to open or close the ventilation apertures. This allows airflow to be regulated without removing or replacing the grille. The vent can be fully open, partially open, or fully closed depending on ventilation requirements.
The Iron Works Patterned Hit & Miss Vent suits Victorian and Edwardian buildings where decorative cast iron or brass ventilation grilles were part of the original specification — including terrace houses, civic buildings, churches, entrance halls, and estate properties. It is appropriate on listed buildings and conservation area properties as a like-for-like decorative vent replacement, and on new heritage-quality construction where period detailing is required.
The Antique Black cast iron version is suitable for external use. The Polished Lacquered version is best suited to interiors or sheltered external locations where the polished finish will be protected from weathering. The Polished Brass version is suited to interior and semi-exposed locations. For external applications on exposed elevations, the Antique Black finish is the recommended specification.
