Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £24.50 through £27.50 +VAT
Fascia rise and fall bracket for common Og cast iron gutter.
Sizes available:
100mm (4″)
115mm (4.5″)
125mm (5″)
We also manufacture fascia rise and fall brackets for common Og guttering made by: Osma, Marley, Hunter and Lindab
The RB502COG is a fascia-mounted rise and fall bracket for the common ogee cast iron gutter. Where a standard fixed fascia bracket cannot achieve precise fall control — on older properties with settled fascia boards, long gutter runs, or where the gradient must be set independently of the fascia angle — the RB502COG’s adjustable mechanism provides the correct solution. The bracket cup is shaped for the ogee S-curve profile of the common OG gutter.
The threaded rise and fall cup eliminates shimming and packing and allows accurate gradient setting across the full run. Available in three sizes to suit the standard common ogee range: 100mm (4″), 115mm (4.5″), and 125mm (5″).
Also compatible with common ogee guttering manufactured by Osma, Marley, Hunter, and Lindab. Widely specified on listed buildings and heritage conservation projects across England and Wales where the common ogee is the historically correct profile and precise fall control on long or complex runs is required.
Compatibility: Common ogee gutter 100mm, 115mm, 125mm. Also suits Osma, Marley, Hunter, and Lindab common OG. For specification support, call 0333 987 4452.
| Size | -F- 100mm, -G- 115mm, -K- 125mm |
|---|
The H460 accepts round pipe connections in 65mm, 75mm, and 100mm diameters. Square pipe connections are available in 75×75mm, 100×100mm, and 125×125mm. Rectangular connections include 100×75mm, 125×100mm, and 150×100mm options. Connection type is selected at the point of order.
The H1A is available with round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. Please specify your required connection size when ordering, as this determines the SKU. If you are unsure of the correct pipe size for your project, our team can advise — call 0333 987 4452.
Our cast iron airbricks are available in a choice of finishes including primer and painted options. If you require a specific finish for a conservation project or to match existing ironwork, please call us on 0333 987 4452 to discuss.
A hit and miss vent has a sliding plate on the back of the grille that can be opened, partially restricted, or closed entirely without removing the vent from the wall. This allows airflow to be controlled from inside the building, making it suitable for underfloor void ventilation and through-wall ventilation where adjustable airflow is needed.
Our brackets are more commonly used on cast iron rainwater systems. Unlike plastic, cast iron is heavy and the weight keeps the gutter in position. As such our brackets do not normally have retaining clips which could lead to plastic or lightweight gutters blowing out of the bracket. The profile of your gutter should match that of our bracket but without the weight to keep it in place you may well encounter problems in bad weather.
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
Prices for standard cast iron hopper heads are shown on the product page. For larger quantities, bespoke sizing, heritage colour finishes, or full rainwater system specifications, please call 0333 987 4452 or use the contact form.
The H1 is available to accept round pipe connections in 65mm, 75mm, 100mm, and 150mm diameters. The 65mm and 75mm variants measure 305mm wide by 197mm deep and 210mm high. The 100mm variant measures 355mm wide by 230mm deep and 240mm high. A 150mm connection option is also available — please contact the team for dimensions.
Prices are shown on the product pages at tuscanfoundry.com. For volume orders or project pricing, please call 0333 987 4452 or use the contact form on our website.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
