Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £173.15 through £472.87 ex VAT (£207.78 – £567.44 inc VAT)
Our LCC cast iron soil pipe systems and traditional cast iron LCC soil pipe provides a comprehensive offering of traditional socket and spigot pipes and fittings for soil and waste installations on the external facade of buildings.
Pipe Diameter Sizes Available:
50mm (2″) – cast iron LCC soil pipe
65mm (2.5″) – cast iron LCC soil pipe
75mm (3″) – cast iron LCC soil pipe
90mm (3.5″) – cast iron LCC soil pipe
100mm (4″) – cast iron LCC soil pipe
150mm (6″) – cast iron LCC soil pipe
Traditional Cast Iron LCC Soil Pipe Eared – 1829mm: S2001E, S2501E, S3001E, S3501E, S4001E, S6001E
Traditional Cast Iron LCC Soil Pipe Eared – 1219mm: S2004E, S2504E, S3004E, S3504E, S4004E, S6004E
Traditional Cast Iron LCC Soil Pipe Eared – 914mm: S2003E, S2503E, S3003E, S3503E, S4003E, S6003E
Traditional Cast Iron LCC Soil Pipe Eared – 610mm: S2002E, S2502E, S3002E, S3502E, S4002E, S6002E
Palletised UK delivery from £80. Please ensure suitable access and means of unloading on site. See delivery rates.
The Traditional LCC cast iron soil pipe system is the heritage-accurate specification for above-ground soil and waste pipes on period and listed buildings. LCC — cast iron socket-and-spigot soil pipe — is the original construction method for external soil pipes on Victorian, Edwardian, and later period buildings, and remains the correct like-for-like replacement where conservation officers or listed building consent require cast iron to be retained. The system carries soil and waste from WCs, baths, basins, and other sanitary fittings down the external face of the building to the underground drain.
The LCC Soil Pipe Eared 1829mm is the full-length eared cast iron soil pipe section, with integral ears cast into the socket collar for direct wall fixing. The eared pipe is the standard specification for external soil pipe runs on period buildings — the ears allow the pipe to be secured directly to the masonry wall face without a separate bracket, replicating the original fixing method used on Victorian and Edwardian buildings.
Available in six diameters: 50mm (2″), 65mm (2.5″), 75mm (3″), 90mm (3.5″), 100mm (4″), and 150mm (6″). Standard length 1829mm (6 feet). Manufactured in cast iron. Part codes: S2001E (50mm), S2501E (65mm), S3001E (75mm), S3501E (90mm), S4001E (100mm), S6001E (150mm). For specification support, call 0333 987 4452.
Prices for rooflight openers are shown on the product pages at tuscanfoundry.com. For volume orders, project pricing, or compatibility queries, please call 0333 987 4452 or use the contact form on our website.
Yes. Cast iron hopper heads are the historically appropriate choice for listed buildings, and are generally preferred by conservation officers and local planning authorities over modern plastic alternatives. Tuscan Foundry cast iron hopper heads are manufactured in solid grey iron and are suitable for use on listed buildings and within conservation areas. A linseed oil finish is also available, which is particularly appropriate for sensitive heritage projects.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The Ornamental Airbrick is suited to Victorian villas, bay-fronted terraces, Gothic Revival institutional buildings, church halls, and civic buildings where decorative ironwork is part of the architectural language. It is also appropriate for listed buildings and conservation area properties where the airbrick is on a prominent elevation and the ventilation grille is expected to carry decorative character.
Our cast iron airbricks are available in three standard sizes: 225mm × 75mm (single course), 225mm × 150mm (double course), and 225mm × 225mm (square format). These correspond to the standard airbrick positions used in Victorian and Edwardian brickwork. Each size is available across the School Board, Louvre, and Ornamental pattern ranges.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
The louvre face provides directional airflow and offers some resistance to driven rain entering the subfloor void, making it a practical choice for exposed elevations or properties in areas with significant prevailing wind and rainfall. The square-grid (school board) pattern offers a larger open ventilation area but less weather protection.
The Polished Brass finish suits buildings where brass metalwork was standard — formal Victorian terrace housing, civic and institutional buildings, and high-quality estate architecture. It is appropriate on listed buildings and conservation properties where the wider ironmongery specification is in brass and a matching material is required.
Yes. Cast iron hopper heads are the historically correct choice for listed and period buildings, and a like-for-like cast iron replacement is generally accepted without objection by conservation officers. We manufacture to BS 460 for genuine heritage character and durability.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
