Cragside is a Victorian country house in Rothbury, Northumberland, designed by architect Norman Shaw and built for industrialist William Armstrong between 1863 and 1895. It was the first house in the world to be lit by hydroelectric power. It is a Grade I listed building and Scheduled Monument, managed by the National Trust and open to visitors.

What architectural style is Cragside?

Cragside is built in the Old English or Arts and Crafts style, with a dramatic multi-gabled silhouette set into a rocky hillside in Northumberland. The design by Norman Shaw features extensive timber framing, ornate brickwork, and complex rooflines requiring a substantial cast iron rainwater system.

What rainwater systems are appropriate for Victorian country houses like Cragside?

Victorian country houses typically feature cast iron gutters, downpipes, and ornamental hopper heads integral to the architectural character of the building. For complex multi-gabled rooflines, large-capacity cast iron profiles and bespoke castings are often required. Tuscan Foundry Products supplies heritage cast iron for National Trust and similar projects — call 0333 987 4452.

Does Tuscan Foundry supply cast iron guttering for Northumberland properties?

Yes. Tuscan Foundry Products supplies cast iron rainwater systems for listed and period buildings throughout Northumberland, including Victorian country houses, estate buildings, and ecclesiastical properties. Call 0333 987 4452 or email info@tuscanfoundry.com to discuss your project.

What cast iron guttering is appropriate for a period property in Kent?

Period properties in Kent typically feature Half Round or Ogee cast iron gutters depending on the building's age and style. Georgian and early Victorian properties commonly have Ogee profile; later Victorian and Edwardian properties often feature Half Round. Tuscan Foundry Products can advise on the most appropriate choice for your Kent property — call 0333 987 4452.

Do listed properties in Kent need cast iron guttering?

Listed buildings in Kent are required to maintain the character of the original building. Replacing cast iron guttering with uPVC is likely to require Listed Building Consent and is unlikely to be approved by Kent conservation officers. Like-for-like replacement in cast iron does not normally require consent. Tuscan Foundry Products supplies cast iron guttering for listed properties throughout Kent.

Does Tuscan Foundry deliver cast iron guttering to Kent?

Yes. Tuscan Foundry Products delivers cast iron gutters, downpipes, hoppers, and fittings to locations throughout Kent. We supply architects, conservation contractors, and private clients on listed and period buildings across the county. Call 0333 987 4452 or email info@tuscanfoundry.com to discuss your project.

What is a quinquennial inspection?

A quinquennial inspection is a mandatory five-yearly condition survey of a Church of England church, carried out by an approved architect or chartered building surveyor. It assesses the condition of all elements including the roof, rainwater drainage, walls, windows, and fittings, and produces a prioritised schedule of repairs.

What type of guttering is appropriate for a historic church?

Cast iron gutters and downpipes are the appropriate and most commonly specified rainwater system for historic churches. They match original drainage systems on Victorian, Georgian, and earlier ecclesiastical buildings, comply with BS 460:2002, and are acceptable to Diocesan Advisory Committees and conservation officers. Tuscan Foundry Products supplies cast iron church drainage systems — call 0333 987 4452 for guidance.

Does replacing church guttering require a faculty?

Replacing guttering like-for-like in the same material on a Church of England church typically falls within List A or List B of the Faculty Jurisdiction Rules 2015 and may not require a full faculty. Any change of material is likely to require a faculty. Always check with the Diocesan Advisory Committee before proceeding.

How long do cast iron gutters last on a church?

Cast iron gutters correctly installed, painted, and maintained can last in excess of 100 years on a church building. Regular repainting every 7-10 years and prompt attention to joint failures are the key maintenance tasks. Linseed oil paint is increasingly used on ecclesiastical buildings as a period-appropriate and durable finish.

Can Tuscan Foundry supply large-capacity gutters for churches?

Yes. Tuscan Foundry Products stocks large-capacity cast iron gutter profiles appropriate for the wide roof spans of churches, including Deep Half Round and Large Sand Cast profiles. Bespoke profiles are available where the original section is non-standard. Contact us on 0333 987 4452.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

What are large sand cast cast iron gutters?

Large sand cast cast iron gutters are heritage rainwater profiles manufactured by the traditional sand casting process in sizes significantly larger than standard stock ranges. They are produced for buildings where standard gutter profiles — typically up to 150mm — are insufficient for the roof area, drainage load, or where the specific historic profile of the building must be matched for conservation accuracy. Profiles include large deep half round, moulded ogee, deep ogee, railway pattern, and box gutter sections. Tuscan Foundry Products has been casting these profiles since 1893.

Who are large sand cast gutters suitable for?

Large sand cast cast iron gutters are suited to country houses, major civic buildings, cathedrals and large churches, Victorian institutional buildings, railway heritage sites, industrial heritage buildings, and estate architecture. They are specified where a standard stock gutter is too small for the drainage requirement, or where a listed building or conservation area project requires a like-for-like match to the original historic profile in a size that standard ranges do not provide.

How do I order a large sand cast cast iron gutter from Tuscan Foundry Products?

Large sand cast gutters are produced to order and are priced on application. Lead times are typically 8–10 weeks from order confirmation. Contact Tuscan Foundry Products on 0333 987 4452 to discuss your profile, sizes, fittings requirements, and project timeline. A site survey may be recommended for complex conservation projects where profile matching is critical.

Rooflight Spares Highline Frame Saddle

How do I get a price for a rooflight pole winder opener?

Prices are shown on the product pages at tuscanfoundry.com. For volume orders or project pricing, please call 0333 987 4452 or use the contact form on our website.

How does a hit and miss vent work?

A hit and miss vent has a sliding plate on the back of the grille that can be opened, partially restricted, or closed entirely without removing the vent from the wall. This allows airflow to be controlled from inside the building, making it suitable for underfloor void ventilation and through-wall ventilation where adjustable airflow is needed.

How do I get a price for a cast iron airbrick?

Prices are shown on each product page. For project quantities, bespoke specifications, or conservation-related queries, please call us on 0333 987 4452 or use the contact form on our website.

Where can I purchase cheap cast iron gutter and pipe?

With National Maintenance week fast approaching (18th – 25th November 2011), Tuscan Foundry Products Ltd have decided to help period property owners look after rainwater systems by offering big discounts on selected cast iron gutters, pipes and fittings.

Friday 25th November is designated as National Gutters Day and on this particular day, homeowners are encouraged to check their systems for evidence of damage. Repairing sections of damaged cast iron gutter and pipe can help avoid potentially thousands of pounds of damage to brickwork.

Tuscan is offering these savings across a range of profiles and includes both primer and painted stock. The offers will only be available whilst stocks last so visit our website to view our discounted cast iron rainwater goods today.

For more information concerning National Maintenance Week visit the Society for the Protect of Ancient Buildings (SPAB) at www.maintainyourbuilding.org.uk

What pipe connection sizes do your cast iron hopper heads accept?

The Strayton H42A accepts round, square, and rectangular pipe connections. Round: 65mm, 75mm, and 100mm. Square: 75×75mm, 100×100mm, and 125×125mm. Rectangular: 100×75mm, 125×100mm, and 150×100mm. Please specify your required connection size when ordering.

What is the difference between the Antique Black, Polished Lacquered, and Polished Brass finishes?

The Antique Black finish is cast iron with a blackened surface — the most historically accurate finish for cast iron ironwork and the most appropriate for the majority of heritage applications. Polished Lacquered is cast iron with a bright polished surface sealed with clear lacquer, suited to interiors and sheltered locations where polished ironwork is the specification. Polished Brass is solid polished brass throughout — the correct choice where existing building fittings are in brass or where a warm metal tone is required.

How do I get a price for a rooflight opener?

Prices for rooflight openers are shown on the product pages at tuscanfoundry.com. For volume orders, project pricing, or compatibility queries, please call 0333 987 4452 or use the contact form on our website.

What finish are your cast iron airbricks supplied in?

Our cast iron airbricks are supplied in primed finish, ready for on-site painting. This allows them to be finished to match the existing ironwork or masonry colour of the building. Standard black gloss is the most common finish for conservation and heritage projects.

We have just purchased some cast iron radiators and they have a slightly uneven texture to the surface. What can we do about this.

Casting of iron is an imperfect processs. It is possible with some cast iron radiators that you will get minor imperfections in the surface finish. When radiators are painted this will reduce and over the years every additional coat of paint applied will provide a smoother more equal finish.

How do I get a price for ornamental cast iron airbricks?

Prices are shown on the product page. For project quantities, multiple pattern orders, or a formal quotation, call 0333 987 4452 or use the contact form.

App_Timber	Yes
App_UPVC	Yes
Application	uPVC & Timber
Finish	White
Finish Group	White
Length mm	20mm
Option	Component
Price	0
Type	Highline Systems

Highline Frame Saddle – White – Pack 10

Additional information

FAQ Categories

How do I get a price for a rooflight pole winder opener?

How does a hit and miss vent work?

How do I get a price for a cast iron airbrick?

Where can I purchase cheap cast iron gutter and pipe?

What pipe connection sizes do your cast iron hopper heads accept?

What is the difference between the Antique Black, Polished Lacquered, and Polished Brass finishes?

How do I get a price for a rooflight opener?

What finish are your cast iron airbricks supplied in?

We have just purchased some cast iron radiators and they have a slightly uneven texture to the surface. What can we do about this.

How do I get a price for ornamental cast iron airbricks?

Working together to make the world a brighter place

CONTACT US

FOLLOW US

MESSAGE US

ABOUT US

PRODUCTS

SUPPORT

CONTACT

Highline Frame Saddle – White – Pack 10

Additional information

FAQ Categories

How do I get a price for a rooflight pole winder opener?

How does a hit and miss vent work?

How do I get a price for a cast iron airbrick?

Where can I purchase cheap cast iron gutter and pipe?

What pipe connection sizes do your cast iron hopper heads accept?

What is the difference between the Antique Black, Polished Lacquered, and Polished Brass finishes?

How do I get a price for a rooflight opener?

What finish are your cast iron airbricks supplied in?

We have just purchased some cast iron radiators and they have a slightly uneven texture to the surface. What can we do about this.

How do I get a price for ornamental cast iron airbricks?

Related products

Timber Window Folding Opener – 260mm

Recessed Quadilent Stay – 175mm – Polished Chrome

Quadilent Stay – Flush – 175mm