Established 1893 | BS 460:2002 Certified | UK & International Supply | Expert Technical Support | 0333 987 4452
Price range: £10.00 through £12.00 +VAT
Zinc plated coach screws in packs of 10.
The coach screw is a heavy-duty zinc-plated wood screw used to fix cast iron downpipe strap brackets and holderbats to timber — typically to rafter feet, roof boarding, timber-framed walls, or wooden soffits where a standard masonry fixing is not available or appropriate. The coarse thread and hexagonal head of the coach screw provide high pull-out resistance in timber and allow the fixing to be driven and tightened with a spanner or socket wrench rather than a screwdriver.
Supplied in packs of 10. Zinc-plated for outdoor corrosion resistance. Appropriate for use with cast iron downpipe brackets on period buildings where timber construction is the available fixing substrate. For specification support, call 0333 987 4452.
| Size | 75mm (3", 100mm (4") |
|---|
All of our cast iron radiators are availbale as standard with a 1/2″ BSP (15mm) connection. We are though also able to supply many of our radiators and valves with 3/4″ BSP connections. Due to the size proportions of some radiators and valves 3/4″ connections may be more suitable.
Linseed oil paint is the most appropriate finish for cast iron guttering on listed and historic buildings. It is breathable, flexible, and penetrating — qualities that suit the movement characteristics of cast iron through seasonal temperature changes. Tuscan Foundry Products offers a curated range of heritage linseed oil colours. For modern applications, a high-quality exterior oil-based paint system over a metal primer is also acceptable.
Our standard spike or sturt length is 300mm (12″). Other sizes are available upon request.
Our cast iron hopper heads are available with 65mm, 75mm and 100mm round outlets, 75mm, 100mm and 125mm square outlets, and 100x75mm, 125x100mm and 150x125mm rectangular outlets, to match the downpipe already on site or specified for the project.
Hopper heads are supplied in red oxide primer ready for on-site painting, or pre-finished in black. A full range of Heritage Colours in traditional linseed oil paint is also available on request — please contact us for the swatch chart.
The Antique Black finish is cast iron with a blackened surface — the most historically accurate finish for cast iron ironwork and the most appropriate for the majority of heritage applications. Polished Lacquered is cast iron with a bright polished surface sealed with clear lacquer, suited to interiors and sheltered locations where polished ironwork is the specification. Polished Brass is solid polished brass throughout — the correct choice where existing building fittings are in brass or where a warm metal tone is required.
We do offer a range of Ogee patterned gutters in both straight and radius profiles. The straight profiles are much more common and as such cost less.
Georgian properties typically used Half Round or ogee-style guttering, often in larger sizes to handle the roof areas of substantial period buildings. Large sand cast gutter profiles are appropriate for grander Georgian architecture, particularly country houses, institutions, and formal terraces. If the original guttering has been lost or damaged, a site survey can establish the most appropriate profile from the building
Prices are shown on each product page. For project quantities, bespoke specifications, or conservation-related queries, please call us on 0333 987 4452 or use the contact form on our website.
Yes. The Louvre Airbrick is dimensioned to standard brick course openings and is suitable for direct replacement of worn, broken, or missing original cast iron louvre grilles. If you are unsure of the size required, measure the opening in the brickwork rather than the existing damaged grille.
